Sequence Diagram Create Object

The object notation of a UML Sequence Diagram is a rectangle with it's lifeline (a dashed line) descending from the center of its bottom edge. This element represents the life span of the object during the scenario being modeled. The sequence - is used to draw a message between two participants. Participants do not have to be explicitly declared. To have a dotted arrow, you use - It is also possible to use sequence diagrams, rules are different for the other. Yes, it is common practice to let an actor send messages directly to parts of the system, not to the system as a whole. I say 'parts' instead of 'objects' because in UML 2, the life lines in sequence diagrams correspond to parts, not to individual instances and are therefore not underlined. In this step-by-step tutorial, we'll show you how to make a UML sequence diagram using Lucidchart. Sequence diagrams are a type of Unified Modeling Language. Sequence diagram The Sequence Diagram models the collaboration of objects based on a time sequence. It shows how the objects interact with others in a particular scenario of a use case. With the advanced visual modeling capability, you can create complex sequence diagram in few clicks.

Home > Articles > Software Development & Management > UML

Enterprise Architect Sequence Diagram Create Object

  1. Creating and Deleting Participants
Page 1 of 4Next >
Typically, in UML, a sequence diagram captures the behavior of a single scenario. The diagram shows a number of example objects and the messages that are passed between these objects within the use case. This book chapter explains what they're all about, when to use them—plus how to create and delete participants, use loops, conditionals, and the best way to treat synchronous and asynchronous calls.
This chapter is from the book
UML Distilled: A Brief Guide to the Standard Object Modeling Language, 3rd Edition

This chapter is from the book

This chapter is from the book

UML Distilled: A Brief Guide to the Standard Object Modeling Language, 3rd Edition

Interaction diagrams describe how groups of objects collaborate in some behavior. The UML defines several forms of interaction diagram, of which the most common is the sequence diagram.

Typically, a sequence diagram captures the behavior of a single scenario. The diagram shows a number of example objects and the messages that are passed between these objects within the use case.

Sequence diagram create objects

To begin the discussion, I’ll consider a simple scenario. We have an order and are going to invoke a command on it to calculate its price. To do that, the order needs to look at all the line items on the order and determine their prices, which are based on the pricing rules of the order line’s products. Having done that for all the line items, the order then needs to compute an overall discount, which is based on rules tied to the customer.

Figure 4.1 is a sequence diagram that shows one implementation of that scenario. Sequence diagrams show the interaction by showing each participant with a lifeline that runs vertically down the page and the ordering of messages by reading down the page.

Figure 4.1. A sequence diagram for centralized control

One of the nice things about a sequence diagram is that I almost don’t have to explain the notation. You can see that an instance of order sends getQuantity and getProduct messages to the order line. You can also see how we show the order invoking a method on itself and how that method sends getDiscountInfo to an instance of customer.

The diagram, however, doesn’t show everything very well. The sequence of messages getQuantity, getProduct, getPricingDetails, and calculateBasePrice needs to be done for each order line on the order, while calculateDiscounts is invoked just once. You can’t tell that from this diagram, although I’ll introduce some more notation to handle that later.

Most of the time, you can think of the participants in an interaction diagram as objects, as indeed they were in UML 1. But in UML 2, their roles are much more complicated, and to explain it all fully is beyond this book. So I use the term participants, a word that isn’t used formally in the UML spec. In UML 1, participants were objects and so their names were underlined, but in UML 2, they should be shown without the underline, as I’ve done here.

In these diagrams, I’ve named the participants using the style anOrder. This works well most of the time. A fuller syntax is name : Class, where both the name and the class are optional, but you must keep the colon if you use the class. (Figure 4.4, shown on page 58, uses this style.)

Each lifeline has an activation bar that shows when the participant is active in the interaction. This corresponds to one of the participant’s methods being on the stack. Activation bars are optional in UML, but I find them extremely valuable in clarifying the behavior. My one exception is when exploring a design during a design session, because they are awkward to draw on whiteboards.

Web Sequence Diagram

Naming often is useful to correlate participants on the diagram. The call getProduct is shown returning aProduct, which is the same name, and therefore the same participant, as the aProduct that the getPricingDetails call is sent to. Note that I’ve used a return arrow for only this call; I did that to show the correspondance. Some people use returns for all calls, but I prefer to use them only where they add information; otherwise, they simply clutter things. Even in this case, you could probably leave the return out without confusing your reader.

The first message doesn’t have a participant that sent it, as it comes from an undetermined source. It’s called a found message.

For another approach to this scenario, take a look at Figure 4.2. The basic problem is still the same, but the way in which the participants collaborate to implement it is very different. The Order asks each Order Line to calculate its own Price. The Order Line itself further hands off the calculation to the Product; note how we show the passing of a parameter. Similarly, to calculate the discount, the Order invokes a method on the Customer. Because it needs information from the Order to do this, the Customer makes a reentrant call (getBaseValue) to the Order to get the data.

Figure 4.2. A sequence diagram for distributed control

The first thing to note about these two diagrams is how clearly the sequence diagram indicates the differences in how the participants interact. This is the great strength of interaction diagrams. They aren’t good at showing details of algorithms, such as loops and conditional behavior, but they make the calls between participants crystal clear and give a really good picture about which participants are doing which processing.

Sequence Diagram Create Object

The second thing to note is the clear difference in styles between the two interactions. Figure 4.1 is centralized control, with one participant pretty much doing all the processing and other participants there to supply data. Figure 4.2 uses distributed control, in which the processing is split among many participants, each one doing a little bit of the algorithm.

Both styles have their strengths and weaknesses. Most people, particularly those new to objects, are more used to centralized control. In many ways, it’s simpler, as all the processing is in one place; with distributed control, in contrast, you have the sensation of chasing around the objects, trying to find the program.

Despite this, object bigots like me strongly prefer distributed control. One of the main goals of good design is to localize the effects of change. Data and behavior that accesses that data often change together. So putting the data and the behavior that uses it together in one place is the first rule of object-oriented design.

Furthermore, by distributing control, you create more opportunities for using polymorphism rather than using conditional logic. If the algorithms for product pricing are different for different types of product, the distributed control mechanism allows us to use subclasses of product to handle these variations.

In general the OO style is to use a lot of little objects with a lot of little methods that give us a lot of plug points for overriding and variation. This style is very confusing to people used to long procedures; indeed, this change is the heart of the paradigm shift of object orientation. It’s something that’s very difficult to teach. It seems that the only way to really understand it is to work in an OO environment with strongly distributed control for a while. Many people then say that they get a sudden 'aha' when the style makes sense. At this point, their brains have been rewired, and they start thinking that decentralized control is actually easier.

Creating and Deleting Participants

Sequence diagrams show some extra notation for creating and deleting participants (Figure 4.3). To create a participant, you draw the message arrow directly into the participant box. A message name is optional here if you are using a constructor, but I usually mark it with 'new' in any case. If the participant immediately does something once it’s created, such as the query command, you start an activation right after the participant box.

Figure 4.3. Creation and deletion of participants

Create Sequence Diagram Tool

Sequence diagram create objects

Deletion of a participant is indicated by big X. A message arrow going into the X indicates one participant explicitly deleting another; an X at the end of a lifeline shows a participant deleting itself.

Plantuml Sequence Diagram Create Object

In a garbage-collected environment, you don’t delete objects directly, but it’s still worth using the X to indicate when an object is no longer needed and is ready to be collected. It’s also appropriate for close operations, indicating that the object isn’t usable any more.