2/1/2022

My Ip Logger

Best IP Address Grabbers Turn a Link into an IP Grabber

In this article we will list the best websites to grab IP addresses using a short link to another website. Using these websites we can extract information such as IP address and GPS location data. When grabbing IP addresses and location data it’s always best to filter Internet bots such as Facebook bots. Internet Bot also known as web robot perform tasks that are both simple but also structurally repetitive at a much higher rate that wouldn’t be possible for a human alone. By filtering Internet Bots this helps to get a more accurate profile of the actual ip addresses that you are grabbing.

  1. Your IP Logger link can access information about user’s IP address, location tracker (country, city) and so on. You can view the full list of features here. This IP Logger & Tracker tool is designed to be as simple as possible to use in a way to get you the most detailed and advanced analytic information on every click.
  2. IP Logger URL Shortener provides the most advanced and detailed statistical data for all clicks on your links or views of your image. You can access information about user’s IP address, country, city, type of device, browser and other useful information.

This will log your ip when it changes. It runs as a service which will automatically start up when the computer starts. This is ideal for people who would like to know their ip when they what to use RDC, or any other services which require them to connect to their PC/server. PLEASE REGISTER AT http://www.tylersimmonds.co.uk/ip/admin/. To access your WeatherLinkIP User Interface, aka WeatherLinkIP Configuration page, you'll need your devices' IP address. This IP address is assigned to your device from your router. If you use the WeatherLink software, you can find it there as well by going to Communications Port from the Setup drop-down menu.

Grabify

Grabify IP Logger allows you to keep track of who has clicked your links. find IPs from Facebook, Twitter, friends on other sites.

Step 1: Go to https://grabify.link

Step 2: Enter link to a webpage into Grabify website and click button “Create URL”

Step 3: You will now have a new tracking link similar to eg. https://grabify.link/GK9OK5 you can use button below to change domain of the link to another domain that is less recognizable or you can use a custom domain.

Step 4: Save tracking code or access link you will need these to retrieve IP addresses that have clicked on your Grabify link.

IP logger

IP Logger URL Shortener allows to track and log IP addresses, GPS location’s. IP Logger URL Shortener provides IP lookup grabber, check what is my ip services, counters and informers.

Step 1: Go to https://iplogger.org
Step 2: Choose an option. Location Tracker, URL Shortener, Invisible Image
Step 3: For the purpose of this guide we will use URL Shortener. Enter a URL and click get IPLogger code
Step 4: Copy Your IPLogger link for collecting statistics (no BB codes)
Step 5: Remember IPLogger ID (Required for accessing logger statistics!!!) you will need this later to retrieve logged IP Addresses.

Blasze

Step 1: Go to https://blasze.com
Step 2: Enter a new URL or Tracking Code and click submit
Step 3: Copy Tracking Link.
Step 4: Copy Access Code you will need this later to retrieve logged IP addresses.
Step 5: Enter Access Code into https://blasze.com to retrieve logged IP addresses.

My Ip Logger

WhatsTheirIP

Step 1: Go to http://whatstheirip.com
Step 2: Enter you Email Address and click “Get Link” button.
Step 3: Copy one of the URL’s provided by http://whatstheirip.com
Step 4: Once your friend clicks on one of the URL’s you will retrieve an Email with their IP Address.

Are you configuring your data logger but confused about all the IP (Internet Protocol) settings? Do you know what the settings mean and what you should set them to?

Logger

Most of us data logger users do not have a background in computer science or network administration. Because IP-based communication is common, however, we need some basic understanding of the settings that are involved. This article provides data logger users with some basic information about IP-related terminology and settings. This information is applicable whether your data logger is connected to a cellular modem, Wi-Fi, or Ethernet.

Connecting LoggerNet to a Data Logger over IP

There are three possible scenarios in which the LoggerNet software can communicate with a data logger over an IP connection:

  • The LoggerNet software and data logger both have a private IP address on the same local network.
  • The data logger has a public IP address.
  • The LoggerNet software has a public IP address. The data logger is configured to establish connection back to the LoggerNet software.

Communication in any of these scenarios could be blocked by a firewall. Troubleshooting issues with firewalls is beyond the scope of this article. To resolve firewall issues, it’s a good idea to seek assistance from your organization’s IT professional.

IP Addresses

An IP (Internet Protocol) address is a numerical address that is unique to each device that participates in a computer network and uses the Internet. Just like the “from” and “to” addresses on the envelope of a letter that you mail, every message in an IP network has an originating (from) address and a destination (to) address.

IPv4 Addresses

IPv4 is the system of addresses that has been in use since the Internet became widespread. IPv4 addresses are typically written as a series of numbers separated by periods. For example: 192.168.0.1.

IPv6 Addresses

My Ip Logger App

IPv6 is the successor to IPv4 and is becoming more common. IPv6 addresses are longer than IPv4 addresses, and they contain letters and numbers separated by colons. Apart from having to type in longer addresses, you shouldn’t notice any other difference when working with Campbell Scientific data loggers.

Tip: For IPv6 functionality, be sure your data loggers and network interfaces are running the most recent operating systems (OSs). Our Downloads web page offers the latest OS upgrades.

DHCP

DHCP (Dynamic Host Configuration Protocol) is a network protocol that you can use to have your device acquire an address assignment from a server on the network. The network server automatically assigns an IP address to your device from a defined range of numbers configured for your network. To enable DHCP, leave the address set to 0.0.0.0.

Public and Private IP Addresses

A public IP address is an address that enables a device to have direct access over the Internet. Typically a web server, email server, or other server device would have a public IP address.

A private IP address is used for devices within a local network so that they are not directly exposed to the Internet. For example, computers at your home may each have a private IP address and connect to the Internet through a router that has a public address.

To establish a connection over the Internet between two devices, at least one of the devices needs to have a public address so that the other device can make a connection to it. After the two devices are connected, two-way communication is possible.

Subnet Mask

A subnet mask is a 32-bit number used to check if an IP address belongs within the same subnet (a subdivision of an IP network) so that traffic can be routed accordingly. For example, subnet masks can be reviewed to determine that all devices with the same prefix in their IP address are part of the same local network. Outgoing communication that is not within the local network is sent to the gateway.

Subnet mask values can be confusing if you don’t understand binary logic. Typically, the default values should work fine.

Gateway

In terms of IP settings, the gateway is the data communication device that routes outgoing IP traffic from a local network to a device on another network. A gateway acts as an entrance to another network so that your message gets out from a local network to the Internet.

DNS

DNS refers to Domain Name System, which translates domain names into IP addresses. This is the technology that lets us access the Campbell Scientific, Inc. website on the Internet by typing in the domain name (www.campbellsci.com) instead of having to remember the underlying numeric IP address.

In your IP settings, there is a value for the DNS server. That is the server you contact to convert a URL/website name to an IP address.

Ping

A ping is a check for the presence and reachability of a device using a specific IP address. If you can ping an address, your computer has found a working route to that address.

Port Numbers

Xbox Ip Puller

A port number is part of the address information that is used to identify the senders and receivers of messages. This is similar to the “from” and “to” addresses on a letter that you mail. For example, if you send a letter to Campbell Scientific without a recipient name in the destination (to) address, we might have trouble routing your letter to the person who should read it and respond to it.

Every IP device can have multiple port numbers, and the port numbers are assigned to specific purposes. For example, port 80 is used for HTTP. An IP message sent to port 80 typically receives a web page as a response. As another example, the default port number used for PakBus communication is 6785.

Firewall

A firewall is the most common network security mechanism. Using predetermined security rules, a firewall monitors and controls the incoming and outgoing network traffic. Unauthorized IP communication is blocked and does not get passed on through the network. In fact, a firewall may be set up to block all incoming connections. Recently, it has become more common for large networks to configure firewalls to block outgoing connections as well.

If you or your IT manager has control over the firewall, you can create small “holes” in the firewall to allow your needed connections. A hole in a firewall can allow access from a particular IP port number, or the access might be limited to a particular source IP address.

Firewalls often have Network Address Translation (NAT) capability. NAT is a means of remapping one IP address space into another by modifying network address information. This is similar to having your mail forwarded when you move or forwarding your phone calls to another number. With NAT, incoming connections to a particular port number are forwarded to a device within the local network. In the case of our LS300G cellular gateway, a NAT rule must be set to forward incoming connections from the modem’s public address to the private address of the locally connected data logger.

Socket

“Socket” is a term you may see in a data logger program. A socket is one endpoint in a link that enables two-way communication between two programs running on a network. A connection is made to a combination of an IP address and port number. After the connection is opened, this specific combination of IP address and port number is referred to as the socket number.

Conclusion

Campbell Scientific data loggers work well with IP-based communication. IP connections can be quick and robust, and they enable additional functionality, such as sending email alarms, sending data files over FTP, or using data logger-hosted web pages.

Recommended for You: You can find thorough instructions on configuring IP settings in the manual for the specific device you are working with. For available IP interfaces that can be used with Campbell Scientific data loggers, refer to our Ethernet Communications web page.

I hope this information has helped you better understand the various IP-related settings you need to use with your data logger. If you have any questions or comments, feel free to post them below.